
VTN has extensive experience in the design of water and wastewater systems; ranging from hydraulic modeling, by-pass/line-stop design, major waterline relocation, effluent water systems, to small and large water and wastewater pipeline design. Our experience over the years has made VTN a leader in water and wastewater system design that can be counted on to perform whatever task we may be asked to do. Some examples of water/wastewater systems that VTN has worked on are as follows:

This project consisted of the design and construction of roughly 25,750 linear feet of 42-inch mortar lined and coated steel pipeline. Approximately 9,600 linear feet of this pipeline was located within a fully improved, high volume traffic roadway. In addition, approximately 6,000 linear feet of 10-inch water main had to be abandoned and relocated in order to allow a construction corridor for the 42-inch pipeline.
This project consisted of the relocation of approximately 600 linear feet of 42-inch mortar lined and coated steel pipeline. Four wet taps/ line stops/ and by-passes were utilized to keep the existing line in service while the relocated line was constructed.
This project consisted of the design and construction of approximately 1,431 linear feet of 12-inch PVC Sewer and 1,410 linear feet of 8-inch PVC sewer to service portions of the Lone Mountain West Master Plan Development.

This project consisted of the design and construction of approximately 15,800 linear feet of 30-inch and 36-inch mortar lined and coated steel pipeline.
This project consisted of approximately 19,800 linear feet of 48-inch and 36-inch mortar lined and coated steel pipeline. The project consisted of approximately one-mile of dual 48-inch pipelines.

The project consisted of the design and construction of 22,000 linear feet of 30-inch and 36-inch mortar lined and coated steel pipe. The project included the design of a 12-inch x 6-inch Pressure Reducing Valve and Vault.